|
2 Channel Microphone Pre-Amplifier / additional 48V Phantom Powering
Optimised for the RCM-402 microphones, but also equipped
with 48V phantom powering for use with other
microphones.
|
Technical Specifications |
| Frequency
response: |
1.6 Hz to
580 kHz (-3dB)
20Hz to 20KHz (-0.1dB) |
| THD+N: |
0.0001% at
0dB gain 0.001% at
53dB gain (at +16dBu, 20Hz to 20KHz) |
| Equivalent
input noise: |
0.4µV at 53dB gain 2µV
at 0dB gain (A-weight) |
| CMRR: |
>90dB at 1KHz |
| Slew Rate: |
20V/µS |
| Crosstalk: |
>100dB at
0-10KHz |
| Maximum
output level: |
10V ,+22dBu |
| Output
impedance: |
75 Ohms |
| Maximum
output current: |
50mA |
| Input
impedance: |
5KOhm
unbalanced, 10KOhm balanced |
| DC offset : |
< ±2mV |
| Cable drive
capability: |
> 100m |
| Gain: |
0 to 53 dB
(0 dB, 15 dB, 30 dB +0 to 23dB in 1dB steps) |
| Phantom
Power: |
48V, 10mA |
| Number of
channels: |
2 |
| Input: |
3-pin XLR
female connector (balanced, transformerless) |
| Output: |
3-pin XLR
male connector (balanced, ground compensated) |
| Power
requirements: |
105-120V
and 210-240V, 50 to 60 Hz |
| Power
consumption: |
6W |
| Weight: |
1.7 kg |
| Dimensions: |
170mm ×
60mm × 210mm (6.7” x 2.4” x 8.3”) |
See also the ►Sonodore
MPA-508
►Datasheet
|
